Expert pcb - Electronic Layout Design

  • Altium Designer - Cadstar
  • Pads - Cadence - Mentor
  • Complex electronics Projects
+ INFORMATIONS

Electronic Layout PCB Design

Since its creation in 2007, Expert PCB has carried out for 500 customers more than 1500 electronic Layout Design as well as PCB designs on all routing stations.

For our French and European customers, we carry out the PCB layout of electronic boards. In fact, from entering the diagrams to importing netlists, we route the maps. By using all the technologies certified with our PCB manufacturing partners but also EMS for assembly. Also our knowledge and experience of electronic CAD study allow you to be confident for your electronic board project.

This internal know-how gives us a strong reactivity when modifying the electronic card. For example for new dimensions, a new environmental constraint or a change of component; Our internal teams can directly readjust the routing of the boards.

Customers

Finalized projects

PCB manufactured

  • Complex HDI design with very low pitch BGA
  • Circuits Flex or rigid multi-layer Flex
  • HF circuit design, with Rogers, Isola materials …
  • Calculations and advice for stacks and definition of controlled impedances?
  • Brass manufacturing process as well as cabling and its testability.
  • In X-ray brazing control if necessary for BGA.

ELECTRONIC CAD SOFTWARE USED

Our PCB CAD stations allow us to import netlists from other CAD software such as: Altium Designer, Cadstar, Eagle, Cadence, Visula, Orcad, CR5000, Kikad, Proteus…

Altium Designer
Cadstar
Cadence
Orcad

High Tech PCB Technologies

The trend towards the miniaturization of electronics has not stopped. Indeed, the use of BGA, µBGA which are components more and more small and having electronic operating speeds more and more fast requires an obvious routing expertise. Whether it is Rigid, Flex, Flex-Rigid or FR4 Semiflex PCB. Expert PCB therefore uses the technologies that suit your electronic board project. Our experienced implanters support you from the development phase.

  • Single, double-sided, multi-layered.
  • Layout up to 32 layers, rigid / flex / flex-rigid.
  • HDI design with Micro Via / via buried technology, via blind, via in pad.
  • HF circuit, impedance simulation, Roger materials, Isola, etc ..
  • Constrained signals: High current, RF, controlled impedance, controlled length and High speed bus, differential impedance, High Speed signal integrity.
Expert PCB Altium
  • Fine line, fine pitch, BGA, uBGA.
  • Routing of any core type (STM32, FPGA, CPLD, iMx, Intel, Samsung, Cortex …)
  • Routing of any type of digital and analog interface (DDRx, PCI Express, Giga Ethernet, GSM, GPRS, Wifi, Lora, Bluetooth, BLE, Zigbee, IoT, 3G, 4G, SigFox, USB, SD, Audio functions, JTAG, RS485, ARINC429, CAN, CANOPEN, RS232, SPI, I2C, UART, miniPCI …)
Need an electronic design quote?
REQUEST A QUOTE

ISO / IPC Standards and Certifications

When an electronic board has been properly produced in CAD, 80% of the development problems will be solved, all technicians and engineers know this well. Indeed, our completed projects have enabled us to capitalize on numerous routing and manufacturing standards and rules. Because we update them every day with our global PCB partners but also with EMS so that the whole production process is as perfect as possible.

  1. Certifications cartes électronique - Recto
  2. Certifications cartes électronique - Verso
  • IPC A600 Acceptability of Printed Circuits
  • IPC 2223 Specific Design Standard for Flexible and Rigid-Flex Printed Circuits.
  • EN55022 class B EMC Compliance (Conducted and Radiated)
  • IPC 4101 Specification for Base Materials for Rigid and Multilayer Printed Circuits
  • IPC 2221 Generic Printed Circuit Design Standard
  • NF C 93-713 Manufacture of printed circuits

Testimonials

  • We were satisfied with the speed with which we took charge of our CAD, the implanters are competent and know their jobs well and also ours. Nothing more to say.

    Xavier V.

  • Expert PCB was able to take charge of the design constraints so that the serial production of electronic boards goes smoothly: industrialization, testability, CEM...

    Julia Y.

  • Expert PCB a su prendre en charge les contraintes de design pour que la production en série des cartes électroniques se passent bien : industrialisation, testabilité, CEM…

    Julia Y.

  • Nous avons été satisfaits par la rapidité de la prise en charge de notre CAO, les implanteurs sont compétents et connaissent bien leurs métiers et aussi le nôtre. Rien à dire de plus.

    Xavier V.

EXPERT PCB : Electronic Design House

+33 (0)4.28.61.78.43

99 CHEMIN DES HUGUENOTS - 26000 VALENCE

contact@expert-pcb.com